Poly(L-Lactide) PLLA CAS 33135-50-1 Ụlọ ọrụ ọkwa ahụike dị elu

Nkọwa dị mkpirikpi:

Aha kemịkal: Poly (L-lactide)

Ụdị ihe atụ: PLLA;Poly (L-Lactic Acid)

Ọkụ: 33135-50-1

Ntụ ntụ edo edo na-acha ọcha ma ọ bụ na-acha odo odo

Ogo dị elu, mmepụta azụmahịa

Inquiry: alvin@ruifuchem.com

Zitere anyị email

Nkọwa ngwaahịa

Ngwaahịa ndị emetụtara

Mkpado ngwaahịa

Nkọwa:

Onye nrụpụta nwere ịdị ọcha dị elu yana ịdị mma kwụsie ike
Aha ọgwụ: Poly (L-lactide);PLLA
Ọkụ: 33135-50-1
Ogo dị elu, mmepụta azụmahịa

Njirimara kemịkalụ:

Aha Chemical	Poly (L-Lactide)
Ụdị okwu	PLLA;Poly (L-lactic acid);Polymer L-Lactide;Polymer PLLA
Nọmba CAS	33135-50-1
Nọmba CAT	RF-PI262
Ọnọdụ Ahịa	N'ọkwa, Mpụta Ihe ruru Tọn
Usoro ihe omimi	C6H8O4
Ibu molekụla	144.125
Ebe Na-agbaze	153 ℃
Ebe esi nri	285.5 ℃ na 760 mmHg
Nnukwu ike ndọda	1.27 g/cm3
Ọnọdụ mbupu	Ebugara n'okpuru okpomọkụ gburugburu
Ụdị	Ruifu Chemical

Nkọwapụta:

Nkọwa	Emere PLLA site na poly (L-lactide) ma nwee ezigbo biocompatibility, bio resorbability, biodegradability.Mgbe mmebi ahụ gasịrị, a na-ewepụ ngwaahịa ahụ site na metabolism na ọ dịghị enwe mmerụ na mmetụta dị n'ahụ mmadụ.Ya mere a na-eji ngwaahịa anyị eme ihe ugbu a n'ọhịa nke ngwaọrụ ahụike na microspheres maka nnyefe ọgwụ wdg.
Njirimara anụ ahụ-kemịkalụ	Aha kemịkalụ	Poly (L-lactide), Poly (L-lactic acid), L-polylactide
	Nọmba ndekọ CAS	33135-50-1
	Ọdịdị kemịkal1
	Usoro ihe omimi 1
	Ọdịdị kemịkal2
	Usoro ihe omimi2
Nkọwapụta	Nwalee	Usoro	Nkọwapụta
	Ọdịdị	Anya	Ọcha, ntụ ntụ edo edo na-acha ọcha
	Viscosity ebupụtara	Na-akwado viscometer	0.30-2.25 dl / g
	monomer fọdụrụnụ	chromatography gas	<0.5%
	Stannum (Catalyst)	Atomic fluorescence spectrometry	<150 ppm
	Maka batch ọ bụla a na-enye asambodo nyocha, na-egosi data nyocha nke ekpebisiri ike na ụlọ nyocha njikwa mma anyị.Enwere ike ịme data nyocha ndị ọzọ mgbe a rịọrọ ya.
Nkwakọ ngwaahịa	100g / 500g / 1kg kwa aluminum foil akpa
Kwado nchekwa	A na-echekwa ya na ebe dị jụụ na nke kpọrọ nkụ na-enweghị ìhè anyanwụ, a na-atụ aro friji.Okpomọkụ (2-8°C)
Ndụ nchekwa	Mgbe echekwara na nkwakọ ngwaahịa mbụ na obere okpomọkụ (2-8°C), PLLA na-edobe ihe mbụ ya ma ọ dịkarịa ala afọ abụọ.
Katalọgụ ngwaahịa	Nlereanya	Ọnụ ọgụgụ IV dl/g	Mv Range (puku iri)
	PL-05	0.30-0.75	0.6-2.0
	PL-10	0.75-1.25	2.0-4.0
	PL-15	1.25-1.75	4.0-6.4
	PL-20	1.75-2.25	6.4-9.0

IV = Viscosity dị n'ime
MV = Arọ Molecular Viscosity

Ngwungwu & Nchekwa:

ngwugwu: Kalama, Aluminom foil bag, Cardboard Drum, 25kg / Drum, ma ọ bụ dị ka ndị ahịa chọrọ.

Ọnọdụ Nchekwa:Na-echekwa n'ime akpa ndị a kpuchiri ekpuchi na ebe dị jụụ na nke kpọrọ nkụ;Chebe pụọ na ọkụ, mmiri mmiri na ọrịa nje.

Uru:

Ajụjụ:

Ngwa:

Shanghai Ruifu Chemical Co., Ltd bụ onye na-emepụta ihe na onye na-ebubata Poly (L-Lactide), PLLA (CAS: 33135-50-1) na oke mma.Poly (L-Lactide), PLLA (CAS: 33135-50-1) nwere ezigbo biocompatibility, bio resorbability, biodegradability.Mgbe mmebi ahụ gasịrị, a na-ewepụ ngwaahịa ahụ site na metabolism na ọ dịghị enwe mmerụ na mmetụta dị n'ahụ mmadụ.Ya mere, a na-eji ngwaahịa anyị eme ihe ugbu a n'ọhịa nke ngwaọrụ ọgwụ, dị ka suture na-amị amị, anụ ahụ engineering scaffolds, orthopedics, akpụkpọ anụ;microspheres maka nnyefe ọgwụ wdg.